Prisms

Features

• Complete with mount, prisms, lens cap
• 7260-31  AP31A Triple Non-Tilting Prism Assembly
• 7261-31  AP32A Triple Tilting Prism Assembly
• 7261-32  AP11A Single Tilting Prism Assembly

Targets

• 7260-41  AP31T Target for 7260-33 AP31; attaches to top of mount with clamp screw
• 7261-39  AP51 Target for Yoke-Mounted EDM; adjustable to match distance between optical axis of theodolite and EDM; accepts single-, triple-and nine-prism assemblies; target extensions (7261-43 AP51ET) available for long distance shots
• 7261-41  AP32T Target for AP32; attaches to yoke in slide-in slot; clamp screws secure and center target
• 7261-42  AP11T Target for AP11; attaches to yoke in slide-in slot; clamp screws secure and center target
• 7261-43  AP51ET Oversize Target (Requires 7261-39 AP51)

Mount and Prisms

• 7261-33  AP32 Triple Tilting Mount with fourth mounting hole to properly position a single prism; also has peep sight for aiming
• 7261-34   AP11 Single Tilting Mount; has collimator-type sight for fast aiming
• 7261-35  AP01 -40mm Prism (Limited quantities available)
• 7261-37  AP12 Double Yoke Mount with VIal; tilting portion completely surrounded by yoke for versatility; bayonet mount on top and bottom; level vial on mount eliminates need for vial on prism pole
• 7261-40  AP13 Target and Mount; for telescope-mounted EDM

Accessories

• 7260-36  Replacement Bayonet Adaptor for AP31
• 7260-46  AP43 Nine Prism Adaptor — requires three 7260-33 triple mounts.
• 7261-36  AP01S -30mm Adaptor adapts AP Prisms to -30mm offset
• 7261-44  AP30P Sighting Pole for AP31, AP32, AP11, AP12
• 7261-48  Graduated Precise Prism Pole
• 7261-50  AP41 Optical Plummet Tribrach Adaptor; accepts all mount and target assemblies; has 60" level vial for accurate leveling and centering, adjustable to match height of optical axis above tribrach; use with 7311-34
• 7261-51  AP44 Tribrach Adaptor; like 7261-50 but no optical plummet; use with 7311-35
• 7266-36   Lens Cap
• 7311-34  WA1 Tribrach
• 7311-35  WOA Optical Plummet Tribrach
• 8078-50  Prism Pole Tripod
• 8078-51  Prism Pole Point
7261-34  System A: Single Prism, Tilting
• 7261-35
• 7266-42
• 7311-50
• 7311-34
• 7260-33  System C: Triple Prism, Tilting
• 7261-35
• 7261-41
• 7261-50
• 7261-34
• 7260-33  System D: Nine Prism, Stationary
• 7261-35
• 7260-46
• 7261-50
• Systems include -40mm Prism (7261-35). All systems may be ordered with -30mm prism (7266-35) as a substitute
• Precision ground from one solid piece of optical glass
• Stainless steel fittings for long wear
• Can be mounted for either -40 or -30mm offset
• Robber O-ring completely seals prism against moisture and contamination
• Face diameter 2-5/16 in
• Target and prism configuration ideal for total station instruments with co-axial telescope and EDM optical systems

-0/30 Prism Systems

• 7266-32  Single Tilting Prism Assembly
• 7266-45  Economy Prism in can. 0 or -30mm offset
• 7266-48  Economy Prism with Target and Bayonet Base

Prism Accessories

• 7260-36  Plastic Lens Cover
• 7260-37  Retainer Screw

Retroprism Carrying Cases

• Codura case with full zipper for easy access and storage of prisms; padded inside to protect against shock. Exterior is International Orange. Complete with sturdy carrying strap.
• 7270-50  Case for Polycarbonate Prisms; 18-1/2(L) x 6-1/2(W) x 4-1/2(D) in
• 7270-51  Case for Triple Prism; 12(L) x 7(w) x 4(D) in
• 7270-52  Case for Single Prism; 12(L) x 7(w) x 4(D) in

Peanut® Retroprism

• 1 in diameter
• -30mm or 0 offset
• 5/8 x 11 female thread
• Complete with carrying pouch and accessories
• Target and level vial included
• 7268-32