| Telescope Fully transmitting, Coaxial sighting and distance measuring optics. |
| Magnification |
30x |
| Resolving power |
2.5" |
| Field of view |
1°30" (26m/1,000m) |
| Minimum focus |
1.3m (4.3ft) |
| Angle measurement Photoelectrical absolute rotary encoder scanning. Both circles adopt diametrical detection. |
| Unit H&V |
Degree / Gon / Mil, selectable |
| Display resolutions H&V |
SET1130R3/SET2130R3 - .5" / 1", 0.1 / .2mg, 0.002 / 0.005mil, SET3130R3/SET4130R3 - 1" / 5", 0.2 / 1mg, 0.005 / 0.02mil, selectable |
| Accuracy (ISO12857-2 1997) H&V |
SET1130R3 - 1" SET2130R3 - 2" SET 3130R3 - 3" SET4130R3 - 5" |
| Measurement mode |
H:Clockwise / Counterclockwise, 0 set, Hold, angle input, repetition, available
V:Zenith 0°, Horizontal 0° ±, slope in %, selectable |
| Automatic dual-axis-compensator |
Range: ±3' (±55mgon), "out-of-range " warning display provided |
| Distance measurement Modulated laser, Laser diode, Coaxial EDM transmitting and receiving optics (IEC Class 3R, FDA CLass 3R Laser) |
| Maximum measuring range |
A: Average conditions: slight haze, visibility about 20km (12miles), sunny periods, weak scintillation.
B: Good conditions: no haze, visibility about 40km (25miles), overcast, no scintillation. |
| Reflectorless *1A |
0.3 to 350m (1,140ft..) |
| With reflective sheet A |
500m (1,640 ft.) |
| With one AP01 prism |
5,000m (16,400 ft.) |
| Unit |
Meters / Feet / Inch, selectable |
| Display resolution |
SET1130R3/SET2130R3 - 0.0001/0.001m, 0.001/0.01ft., 1/16 or 1/8in. SET3130R3/SET4130R3 - 0.001m (0.01 ft. / 1/8 inch) |
| Accuracy |
|
| Reflectorless *1 |
.3 to 200m: ±(3 + 2ppm x D)mm
Over 200 to 150m: ±(5 + 10ppm x D)mm |
| With reflective sheet |
±(3+ 2ppm x D)mm |
| With AP prism |
±(2 + 2ppm x D)mm |
| Measuring time |
Every 1.3s (initial meas. 2.6 s) (Fine) |
| Measurement mode |
Fine meas. (single/repeat/average) / Rapid (single), Tracking |
| Data storage and transfer |
| Internal memory |
About 10,000 points |
| Memory card unit*2 |
SCRC3 CF card unit is available as a factory option |
| Scale factor setting |
0.5 to 2.0 |
| Interface |
Asynchronous serial, RS-232C compatible, baud rate : 1,200 to 38,400 bps |
| Printer output |
Centronics compatible (w/ optional DOC46 printer cable) |
| General |
| Laser-pointer function |
ON (automatic off 5 minutes after operation) / OFF, selectable |
| Display type |
Alphanumeric/graphic dot matrix LCD (192x80 dots) |
| Keyboard (15keys) |
On both faces |
| Wireless keyboard |
Optional |
| Sensitivity of levels |
|
| Plate level |
SET1130R3/SET2130R3 - 20" 2mm SET3130R/SET4130R - 30" / 2mm |
| Circular level |
10' / 2mm |
| Graphic LCD level |
3' outer circle |
| Optical plummet |
SET1130R3/SET2130R3 - 5.5x SET3130R/SET4130R - 3x |
| Water and dust resistance |
Conformity to class IP64 (IEC60529:1989) |
| Operating temperature |
-20°C to +50°C C (-4°F to +122° F) |
| Tilting / Trunnion axis height |
236 mm (9.3 in.) from tribrach bottom, 193 mm (7.6 in.) from tribrach dish. |
| Size with handle and battery |
W 175xD 171x H 345 mm (W 6.9 x D 6.7 x H 13.6 in.) |
| Weight with handle and battery |
5.8kg (12.7lb.) |
| Power supply - Operating voltage: 6V DC |
| BDC35A detachable battery |
Ni-MH rechargeable battery |
| Continuous use*3 |
About 6.5 hours (About 600 points) |
| Recharging time |
About 70 minutes per battery |
| Battery level display |
4 steps with warning message |
| Automatic power cut-off |
30 / 15 / 10 / 5 minutes after operation / OFF, selectable |
| Resume function |
ON / OFF selectable (backed up for about 1 week) |