| Telescope Fully transmitting, Coaxial sighting and distance measuring optics. |
| Magnification |
30x |
| Resolving power |
2.5" |
| Field of view |
1°30" (26m/1,000m) |
| Minimum focus |
1.3m (4.3ft) |
| Angle measurement Photoelectrical absolute rotary encoder scanning. Both circles adopt diametrical detection. |
| Unit H&V |
Degree / Gon / Mil, selectable |
| Display resolutions H&V |
1" / 5", 0.2mgon/1mgon, 0.005 mil, selectable |
| Accuracy (ISO12857-2 1997) H&V |
SET230R3 - 2" (0.6mgon) SET330R3 - 3" (1mgon) SET530R3 - 5" (1.5mgon) |
| Measurement mode |
H:Clockwise / Counterclockwise, 0 set, Hold, angle input, repetition, available V:Zenith 0°, Horizontal 0° ±, slope in %, selectable |
| Automatic dual-axis-compensator |
Range: ±3' (±55mgon), "out-of-range " warning display provided |
| Distance measurement Modulated laser, Laser diode, Coaxial EDM transmitting and receiving optics (IEC Class 3R, FDA Class 3R laser) |
| Maximum measuring range |
A: Average conditions: slight haze, visibility about 20km (12miles), sunny periods, weak scintillation. B: Good conditions: no haze, visibility about 40km (25miles), overcast, no scintillation. |
| Reflectorless *1A |
SET230R3/SET330R3/SET530R3 - 350m (1,140ft.) |
| With reflective sheet A |
500m (1,640 ft.) |
| With one AP01 prism G |
SET230R/SET330R/SET530R - 5,000m (16,400 ft.) |
| Unit |
Meters / Feet / Inch, selectable |
| Display resolution |
0.001m (0.01 ft. / 1/8 inch) |
| Accuracy |
|
| Reflectorless *1 |
.3 to 200m: ±(3 + 2ppm x D)mm Over 200 to 350m: ±(5 + 10ppm x D)mm |
| With reflective sheet |
±(3+ 2ppm x D)mm |
| With AP prism |
±(2 + 2ppm x D)mm |
| Measuring time |
Every 1.3s (initial meas. 2.6 s) |
| Measurement mode |
Fine meas. (single/repeat/average) / Rapid (single), Tracking |
| Laser |
Wavelength: 635 - 690 nm, Max. output:0.99mW |
| Data storage and transfer |
| Internal memory |
About 10,000 points |
| Memory card unit*2 |
Optional. The 8MB CF card stores approximately 72,000-point data |
| Scale factor setting |
0.5 to 2.0 |
| Interface |
Asynchronous serial, RS-232C compatible, baud rate : 1,200 to 38,400 bps |
| Printer output |
Centronics compatible (w/ optional DOC46 printer cable) |
| General |
| Laser-pointer function |
ON (automatic off 5 minutes after operation) / OFF, selectable |
| Display type |
Alphanumeric/graphic dot matrix LCD (192x80 dots) |
| Keyboard (15keys) |
On both faces |
| Wireless keyboard |
Optional |
| Sensitivity of levels |
|
| Plate level |
SET230R3 - 20" 2mm SET330R3/SET530R3 - 30" / 2mm |
| Circular level |
10' / 2mm |
| Graphic LCD level |
3' outer circle |
| Optical plummet |
Image: Erect, Magnification: 3x, Minimum focus: 0.3m (0.98 ft.) |
| Water and dust resistance |
Conformity to class IP66 (IEC60529) |
| Operating temperature |
-20°C to +50°C C (-4°F to +122° F) |
| Tilting / Trunnion axis height |
236 mm (9.3 in.) from tribrach bottom, 193 mm (7.6 in.) from tribrach dish. |
| Size with handle and battery |
W 165xD 170x H 341 mm (W 6.5 x D 6.7 x H 13.5 in.) |
| Weight with handle and battery |
5.4kg (12lb.) |
| Power supply - Operating voltage: 7.2 V DC |
| BDC46A detachable battery |
Li-lon rechargeable battery |
| Continuous use*3 |
About 5.5 hours (About 650 points) |
| Recharging time |
Less than 2 hours with CDC61/62/64 |
| Battery level display |
4 steps with warning message |
| Automatic power cut-off |
30 / 15 / 10 / 5 minutes after operation / OFF, selectable |
| Resume function |
ON / OFF selectable (backed up for about 1 week) |